Jeep Uconnect 8.4" since MY2020 video interface with rear and front camera inputs

Jeep Uconnect 8.4" since MY2020 video interface with rear and front camera inputs

The video interface allows to insert a rear-view camera, a front camera with auto switching and two additional video sources (e.g. USB-player, DVB-T2 tuner, ...) to the factory-infotainment system of the vehicle manufacturer.

Product features:

• Video-insertion for factory infotainment systems
• 1 Rear-view camera CVBS video-input
• 1 CVBS front camera video-input
• 2 CVBS video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner, .)
• Automatic switching to rear-view camera input on engagement of reverse gear
• Automatic front camera switching after reverse gear for 10 seconds
• Video-in-motion (ONLY for connected video-sources)
• Activatable Parking Guide Lines for Rear-View Camera (not all vehicles)
• Compatible with factory rear-view camera
• AV-inputs PAL/NTSC compatible

Compatibility:

Attention: Not compatible with Jeep Compass since model year 2021 with Uconnect5 with 8.4inch tablet monitor and all-in-one head unit.  

Limitations:

• The interface inserts ONLY video signals into the infotainment (turned ON). For sound use the possibly existing factory-audio-AUX-input or a FM-modulator.
• If 2 AV-sources shall be connected to the infotainment an additional electronic is required.
  
• Automatically switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required.

Specifications:

Connections:

• Video-insertion: 4-pin HSD
• Power and CAN-bus: Plug & play
• Video-input (2x): RCA connector
• Rear and front camera-input: RCA connector

Remember that in some states it is illegal to use the video in motion while driving!

The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.