Smart Camera Switch - front and rear camera smart management Expand

Smart Camera Switch - front and rear camera smart management

CI-SCS1

New

Connect 2 cameras - front and rear- to a single camera video input - smart management

More details

€ 38,90

tax incl.

Smart Camera Switch - connect 2 cameras - front and rear- to a single camera video input - smart management

Main features

  1. RCA video input for front camera with power supply
  2. RCA video input for reverse camera with power supply
  3. 2 cameras smart management with a single camera RCA video output
  4. Automatical rear camera dispaly
  5. Automatical and manual front camera dispaly

Funzionamento:

  • When starting timed front camera display and monitor activation (approximately 10 sec)
  • View rear camera and monitor activation at reverse gear engagement
  • When reverse disarming the front camera is displayed for about 15sec
  • The front camera can be activated manually via supplied micro switch, press it to activate it and a second press to turn it off.

Wiring diagram:

Technical data:

Operation voltage10.5 – 14.8V
Stand-by power drain0mA
Operation power drain50mA
Power consumption2.8W
Temperature range-20°C to +70°C
Weight58g
Measurements65 x 44 x 24mm

Kit content:

  • Smart Camera Switch interface
  • Power cable
  • 2 x RCA camera input cables
  • 1 RCA camera output cable
  • Micro switch


Compatibility:

  • This module can only be installed in combination with a video interface or an aftermarket car radio equipped with CVBS video inputs for rear camera (composite video) with RCA connection.
  • The + 12V rear-camera switching signal is also required.

CategoryRear View Camera Interfaces