Cart
0 Product: Products: (empty)
No products
To be determined Shipping
€ 0,00 Tax
€ 0,00 Total
Prices are tax included
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) To be determined
Tax: € 0,00
Total (tax incl.)
Seat Rear-view camera incl holder exchange rear door opener handle with guide-lines for Tarraco
CI-VSC-E-AU13H-SE
New
Seat Rear-view camera incl holder exchange rear door opener handle with guide-lines for Tarraco
Valutazione: Scrivi per primo una recensione!
Vehicle-specific exchange rear door opener handle with integrated camera incl. holder and switchable guide-lines.
Easy assembling by replacing the factory rear door opener handle.
Professional connector cable with enough length and automotive plug connection.
Easy to lay the cable due to a small cable diameter.
Additional wire for signal transfer, e.g. power supply or rear-view camera signal.
Compatible with:
NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!
Features:
Easy assembling by replacing the factory rear door opener handle.
Professional connector cable with enough length and automotive plug connection.
Easy to lay the cable due to a small cable diameter.
Additional wire for signal transfer, e.g. power supply or rear-view camera signal.
Compatible with:
- Tarraco 2019-
NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!
Features:
- Sensor type 1/3inch CMOS PC3089
- Picture format NTSC
- Resolution 720 x 480 Pixel
- Min illumination 0.4 Lux
- Angle horizontal 130°, vertical 90°, diagonal 170°
- Mirrored image (fixed)
- Parking guide lines, optional switchable
- System cable with throughput, e.g. for reverse signal
- Protection class IP68
- Colour of rear door opener handle and camera black
- Total cable length 10m
- Video connector RCA male connector
- System connector camera 4pin BM
- Diameter camera connector 5mm
- Overall L/W/D 111 x 49 x 58 mm
- Build in hole L/W 101x42 mm
| Operating voltage | +12V DC (6V~16V) |
| Current consumption | 40mA |
| Power consumption | 0.5W |
| Weight incl. cable approx | 290g |
| Operating temperature range | -20°C to +70°C |
| Seat | Tarraco |
| Category | Cameras RVC |
