Skoda from MY2016 exchange rear door opener handle with integrated camera and switchable guide-lines

Vehicle-specific exchange rear door opener handle with integrated camera and switchable guide-lines. Easy assembling by replacing the factory rear door opener handle. Professional connector cable with enough length and automotive plug connection. Easy to lay the cable due to a small cable diameter. Additional wire for signal transfer, e.g. power supply or rear-view camera signal.

Compatible with:

• Enyaq (5A) since 11/2020
• Fabia3 (NJ) from 06/2016 til 08/2021
• Fabia4 (PJ) since 09/2021
• Kamiq (NW4) since 06/2019
• Karoq (NU7) since 07/2017
• Kodiaq (NS7) since 03/2017
• Octavia4 (NX) since 03/2020
• Octavia4 Combi (NX) since 03/2020
• Rapid (NH) from 06/2016 til 02/2019
• Rapid Spaceback (NH) from 06/2016 til 02/2019
• Scala (NW1) since 01/2019
• Superb3 (3V) since 04/2018
• Superb3 Combi (3V) since 04/2018

NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!


Features:

• Sensor type 1/3inch CMOS PC3089
• Picture format NTSC
• Resolution 720 x 480 Pixel
• Min illumination 0.4 Lux
• Angle horizontal 140°, vertical 105°, diagonal 180°
• Mirrored image (fixed)
• Parking guide lines, optional switchable
• System cable with throughput, e.g. for reverse signal
• Protection class IP69K
• Colour of rear door opener handle and camera black
• Total cable length 10m
• Video connector RCA male connector
• System connector camera 4pin BM
• Diameter camera connector 5mm

Dimensions:

• Overall 111 x 44 x 58mm (W x H x T)
  
• Installation opening 105 x 40mm (W x H)